Trade supplier of HVAC zoning, controls and air distribution components across Australia
AUSTRA SUPPLY
Duct access door in galvanised steel, with two turn latches

Duct accessories · Access doors

Duct access doors

Part numbers: AS-ADR-295205, AS-ADR-430295

Galvanised steel access doors for ductwork. Fit them where fire dampers, coils or filters need to be inspected or cleaned.

Sizes295 × 205 mm and 430 × 295 mm face
MaterialGalvanised steel
DoorInsulated, with rubber seal
Part numbers on every size2 parts listed below.
Project quantitiesQuoted to suit your order.

Overview

An access door gives a safe, sealed opening into the duct for inspection and cleaning. Fit one beside fire dampers, coils, filters and other parts that need service.

The door is pressed from 0.6 to 0.8 mm galvanised steel, so it is strong and resists rust. It has 22 mm of insulation inside and a heat-resistant rubber seal around the edge. It closes tight and keeps the air in the duct at temperature. Two turn latches hold it shut.

Two sizes are available. The neck size is the opening you cut into the duct.

Typical applications

  • Fire damper inspection
  • Duct cleaning
  • Coil and filter service
  • Commercial ductwork

Part numbers

Choose a quantity and add each part to your quote list. Prices are sent by written quote.

Part numberDescriptionSize (mm)MaterialUnitQuote
AS-ADR-295205Duct access door 295 × 205295 × 205 face, 245 × 155 neckGalvanised steelEach
AS-ADR-430295Duct access door 430 × 295430 × 295 face, 380 × 245 neckGalvanised steelEach

Specifications

General

Product typeDuct access door
MaterialGalvanised steel, 0.6 to 0.8 mm
Insulation22 mm, inside the door
SealHeat-resistant rubber seal around the door edge
LatchesTwo turn latches
Depth25 mm

Sizes

AS-ADR-295205Face 295 × 205 mm, neck 245 × 155 mm
AS-ADR-430295Face 430 × 295 mm, neck 380 × 245 mm

Specifications may change without notice. Contact us to confirm details for your project.

Compatible products

Products that are often specified with the duct access doors.

  • Disc valve

    Adjustable 150 mm disc valve for supply or exhaust air.

    AS-DV-150
  • Duct corners

    Corner pieces for joining duct flanges, supplied in bulk.

    AS-DC-325

Frequently asked questions

Which size do I cut into the duct?

Cut the opening to the neck size: 245 × 155 mm for AS-ADR-295205, or 380 × 245 mm for AS-ADR-430295.

How do I get a price?

Pricing is by quote. Send us the part numbers and quantities through the enquiry form, or attach your grille schedule, and we will reply with a written trade quote.

Need pricing for a project?

Not sure which part you need? Send us the job or your schedule. We will work out the parts list and quote every line.